Inglebeam Fireplace Beams | Carl Finnell
Carl FinnellOver 35yrs trusted service
Contact

Stoves & fires

Wood burning stovesFire FX, ACR and Heta, supplied and fittedElectric firesBritish Fires and Fire FX, no flue neededEverhotElectric stoves and room heaters

Fireplaces & chambers

Fireplace fittingThe full fireplace serviceTimber fireplacesOak and painted, made to measureStone fireplacesLimestone, marble and porcelainBespoke fireplacesDesigned around one room, fitted prices publishedHearthsStone, granite, tiled and porcelainStove chambersBrick and other chamber typesBeamsOak, stone and non-combustible

Fitting & care

Flues & chimney linersLiners and twin-wall fluesServicingStove servicing and sweepingInstallationHow a HETAS fit works
Ready when you areBook a free home surveySamples, honest advice and one clear quote.Get started
A non-combustible Inglebeam above a wood burning stove
Close-up of an Inglebeam showing the oak grain detail

Carl Finnell · Non-combustible beam

The Inglebeam

Made to orderpriced after your free survey

The look of a solid oak beam where a real timber one will not work, for instance when the beam has to sit close to a stove. Cast in the UK to emulate real oak, but fireproof. Choose your options below, then send it to us for a tailored quote.

Style
Finish
Width

Your Inglebeam

Choose your options to build your beam.

Request a quote for this beamCall 07868 267002

Beams are made to order, so the cost is confirmed in one written quote after a free home survey. No obligation.

  • Non-combustible
  • Free home survey
  • Guaranteed finish

Why an Inglebeam

Real oak looks, without the timber

  • Fireproof, so it sits close to the heatNon-combustible, which matters where the beam sits near a stove and a timber beam would not meet the clearances.
  • Looks like real oakCast to emulate solid oak, right down to the shakes, holes and end grain, so it reads as the genuine article.
  • It will not warp or twistUnlike natural timber, it stays true, with a guaranteed finish every time.
  • Oak and stone finishesLight, medium and dark oak finishes as well as stone finishes, in standard widths with special sizes to order.

When to choose it

The beam for when timber will not work

Every stove manufacturer sets safe distances between the appliance and anything combustible above or around it, and a solid oak beam has to respect them. In plenty of chambers that is no problem, but in others, a low opening, a tall stove, a design that wants the beam tight over the fire, timber simply cannot go where the eye wants it. That is the Inglebeam's job: cast in the UK from real oak originals, completely fireproof, and able to sit where no timber beam could.

It has quietly become the standard answer for media walls too, where anelectric fire or a stove sits inside a built wall and a floating oak-look beam finishes the design. And because it is cast, not grown, it never warps, twists or opens a shake in the heat, which a real beam over a working stove sometimes will. If the beam in your design can safely sit at timber distances, oursolid oak beams are the romantic choice. If it cannot, this is the beam that keeps the look without the compromise, framed by thechamber finish of your choosing.

HETAS registered installer

HETAS Registration Number 2087

HETAS registered

Installed with care, certified with confidence

Carl self-certifies every installation and notifies Building Control on your behalf, so the work is signed off properly and your certificate of compliance is issued for your records.

Verify Carl's HETAS registration

Common questions

The Inglebeam, answered plainly

Can an Inglebeam sit directly above the stove?

It can sit far closer than any timber beam, because it is completely non-combustible. It usually gives far more design flexibility, but the final position always follows the stove manufacturer instructions and the Inglebeam fitting guidelines, which is exactly what we work out on the home survey.

Does the Inglebeam actually look like real oak?

Yes, and this surprises people. Each beam is cast from real oak originals, so the shakes, knots, holes and end grain all come through. Once it is fitted and the room is finished, guests do not spot it. The detail photo on this page is the honest evidence.

What sizes does the Inglebeam come in?

Standard widths of 1220mm, 1372mm and 1524mm cover most chambers, and special sizes are made to order for wider openings. It also comes as a beam only or with matching leg uprights for a full surround look.

Can I paint or change the finish of an Inglebeam?

It arrives finished, in light, medium or dark oak or a stone effect, and the finish is guaranteed consistent, one of its advantages over natural timber. We would not paint over the oak-effect finishes, so choose the tone against our samples on the survey rather than planning to adjust it later.

Is an Inglebeam cheaper than a real oak beam?

Prices vary with the size and finish of each, so if you are undecided we will happily quote both ways. The honest answer is that the choice is rarely about price. It is about position: where the beam can sit at a safe timber clearance, solid oak is wonderful, and where the design wants the beam close to the stove, the Inglebeam is the answer. Both are quoted exactly after the free home survey.

Your enquiry

Send your enquiry to Chris

Our home survey expert will review your details and email you about the next steps.

HETAS-registered installs. We cover Leeds, Harrogate, Wetherby, York, Ripon, Malton, Thirsk and Scarborough.

Not ready for a survey? Call or email us →

So we know where the installation would be.

We'll reply about your enquiry by phone, text or email. Replies may be automated. No marketing messages.

We use your details to respond to your enquiry. Privacy policy.